Choose a language
wenglor web page
OCR Reader
BR40M1R10
  • 20 projects and 20 character sets can be saved inside the sensor
  • Autofocus
  • Outputs and Inputs freely programmable
  • Secure reading of characters and symbols
The wenglor OCR Reader reads up to 100 characters concurrently. The minimum dimensions of a character are approx. 0,75 × 1,25 mm. Reading, comparing, Good/Bad-evaluation of characters and symbols are assured. For the transfer of the process data, an RS-232 interface is available.
Optical Data
Working Range > 20 mm
Resolution 752 × 480 Pixel
Image chip monochrome
Light Source Red Light
Service Life (T = +25 °C) 100000 h
Field of vision see Table 1
Image Repetition Rate 100 Hz
Electrical Data
Supply Voltage 18...30 V DC
Current Consumption (Ub = 24 V) < 200 mA
Response Time > 10 ms
Temperature Range 0...40 °C
Inputs/Outputs 4
Switching Output Voltage Drop < 1,5 V
Switching Output / Switching Current 200 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Interface RS-232
Protection Class III
Mechanical Data
Adjustment USB 2.0
Housing Material Plastic
Degree of Protection IP67
Connection M12 × 1; 8-pin
Function
OCR yes
Output
Configurable as PNP/NPN/Push-Pull yes
NO/NC switchable yes
Ready Output yes
Illumination Output yes
RS-232 Interface yes
USB Interface yes
Table 1
Working Distance 20 mm 200 mm 1000 mm
Field of vision 18 × 12 mm 140 × 90 mm 700 × 450 mm
Connection Diagram
Ctrl.Panel
  • 01 = Switching Status Indicator
  • 66 = USB Status
  • 67 = Busy
  • 70 = Run / Trigger
Dimensioned Picture
All dimensions in mm (1 mm = 0.03937 Inch)
Complementary Products
Connection Cable BG2BSW1-08M
Floodlight ZFFx09-0x
Polarizing Filter ZVPB40001
Protection Housing ZSV-0x-01
Ring Illuminator ZFRx11-0x
Spot Light ZFSx08-0x
Spot Light ZFSx10-0x
Back to: OCR Reader
© 2013  wenglor sensoric gmbh  |  Impressum  |  Sitemap