Inductive Analog Sensor Correction Factor 1
IW070RM65MG3
Inductive Data
| Working Range | 2...7 mm |
| Measuring Distance | 4,5 mm |
| Measuring Range | 5 mm |
| Correction Factors V2A/CuZn/Al | 1,1/1,1/1,1 |
| Mounting | non-flush |
| Mounting A/B/C/D in mm | 27/36/21/15 |
| Standard Target FE360, thickness 1 mm | 21 × 21 mm |
| Linearity | < 1 % |
| Resolution | 2 µm |
Electrical Data
| Supply Voltage | 18...30 V DC |
| Current Consumption (Ub = 24 V) | < 30 mA |
| Cut-Off Frequency | 900 Hz |
| Temperature Drift (-10 °C < Tu <= 50 °C) | 5 % |
| Temperature Drift (50 °C < Tu <= 70 °C) | 10 % |
| Temperature Range | -10...70 °C |
| Analog Output | 0...10 V |
| Current Load Voltage Output | < 1 mA |
| Resistant to Magnetic Fields | yes |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Protection Class | III |
Mechanical Data
| Housing Material | CuZn, nickel-plated |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4-pin |
General Data
| Stock Type | X |
Output
| Analog Output | yes |
Connection Diagram
Mounting
Dimensioned Picture
All dimensions in mm (1 mm = 0.03937 Inch)
- 1 = Analog Output Indicator
Wrench Size
Complementary Products
| Analog Evaluation Unit AW02 |
Data sheet
Connection Technology
Mounting Technology
Complementary Products