wenglor sensoric gmbh :: Technical Data

Through Beam Sensor

OEII403C0103

Hygienic Design makes it easy to clean
Made with food safe materials that are FDA approved
Touch Teach-In, external Teach-In
waterproof IP68 and IP69K

Together with other components, wenglor’s InoxSens Sensors create an innovative system which can be seamlessly integrated into your machine. Their innovative design allows contamination and cleaning agents to flow off by themselves. Setup with the help of touch teach-in is possible directly through the hermetically sealed housing. The laser welded stainless steel housing made of V4A (1.4404/316L) is corrosion-free and resistant to cleaning agents. The captive optics are made of either glass or plastic. The InoxLock system is used for gap-free mounting.

Optical Data

Range	4000 mm
Switching Hysteresis	< 15 %
Light Source	Red Light
Service Life (T = +25 °C)	100000 h
Max. Ambient Light	10000 Lux
Opening Angle	3 °

Electrical Data

Sensor Type	Receiver
Supply Voltage	10...30 V DC
Current Consumption (Ub = 24 V)	< 40 mA
Switching Frequency	500 Hz
Response Time	1 ms
Temperature Drift	< 10 %
Temperature Range	-25...60 °C
Switching Output Voltage Drop	< 2,5 V
PNP Switching Output/Switching Current	200 mA
Residual Current Switching Output	< 50 µA
Short Circuit and Overload Protection	yes
Reverse Polarity Protection	yes
Teach Mode	NT,MT,XT
Protection Class	III

Mechanical Data

Adjustment	Teach-In
Housing Material	Stainless Steel 316L
Degree of Protection	IP68/IP69K
Connection	M12 × 1; 4-pin
Optic Cover	PMMA (FDA)
Material Control Panel	PC (FDA)