Analog Evaluation Unit menu driven
AW02
- Easy operation via menu-driven LCD display
- High-speed evaluation of two analog voltages (GOOD/BAD selection)
- Measurement of thickness, difference, height, unbalance and volume flow
- Two independent outputs
The Evaluation Unit AW02 is able to process the analog voltage values of two sensors from 0 to 10 V. The user-friendly LCD-display indicates all measurement- and result values. The measurement units can be chosen freely, no matter if volt, millimeter, bar or degree Celsius.
Electrical Data
| Supply Voltage | 18...30 V DC |
| Current Consumption (Ub = 24 V) | 100 mA |
| Measurement Rate | 5000 /s |
| Temperature Range | -10...50 °C |
| Switching Outputs | 2 |
| PNP Switching Output/Switching Current | 400 mA |
| PNP Error Output/Switching Current | 400 mA |
| Analog Output | 0...10 V |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Interface | RS-232 |
| Baud Rate | 38,4 kBd |
| Resolution | < 5 mV |
| Analog Inputs | 2 |
| Analog Input | 0...10 V |
| Protection Class | III |
Mechanical Data
| Housing Material | Aluminum |
| Degree of Protection | IP65 |
| Connection | M12 × 1; 8-pin |
Output
| Error Output | yes |
| PNP NO/NC switchable | yes |
| Analog Output | yes |
| RS-232 Interface | yes |
Connection Diagram
Ctrl.Panel
- 03 = Error Indicator
- 04 = Function Indicator
- 20 = Enter Button
- 22 = UP Button
- 23 = Down Button
- 60 = Display
- 69 = ESC Button
Dimensioned Picture
All dimensions in mm (1 mm = 0.03937 Inch)
Complementary Products
| Interface Cable S232W3 |
Data sheet
CAD Data
Connection Technology
Complementary Products
Back to original article