Choose a language
wenglor web page
Fiber Optic Cable Sensor
ODX402P0007
  • External Teach-In
  • Menu-driven settings
  • Recognition of Transparent Objects
  • Reflex and barrier operation mode are possible
  • Teach-In
wenglor Fiber Optic Cables can be adapted to these sensors. The modern OLED display assures easy, menu-driven sensor setup. Signal strengths and the switching threshold can be read from the display as numeric values or as a bar graph. Convenient programming and quick diagnosis is possible via the IO-Link interface.
Optical Data
Switching Hysteresis < 15 %
Light Source Red Light
Wave Length 660 nm
Service Life (T = +25 °C) 100000 h
Max. Ambient Light 10000 Lux
Electrical Data
Supply Voltage 18...30 V DC
Current Consumption (Ub = 24 V) < 40 mA
Switching Frequency 4 kHz
Response Time 125 µs
On-/Off-Delay 0...10000 ms
Temperature Drift < 10 %
Temperature Range -25...60 °C
Switching Output Voltage Drop < 2,5 V
Switching Output / Switching Current 100 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Teach Mode NT,MT,ZT,DT,FT,HT,TP
Interface IO-Link
IO-Link Version 1.0
IO-Link Parameter > 12
Protection Class III
Mechanical Data
Adjustment Teach-In
Housing Material Plastic
Degree of Protection IP65
Connection M8 × 1; 4-pin
DIN-Rail mounting 35 mm
General Data
Selectable menu language X
Password Protection X
Output
Configurable as PNP/Push-Pull yes
NO/NC switchable yes
IO-Link yes
Connection Diagram
Ctrl.Panel
  • 20 = Enter Button
  • 22 = UP Button
  • 23 = Down Button
  • 60 = Display
Dimensioned Picture
All dimensions in mm (1 mm = 0.03937 Inch)
  • 1 = Transmitter Diode
  • 2 = Receiver Diode
Complementary Products
Glass Fiber Optic Cable
IO-Link Master
Plastic Fiber Optic Cable
Back to: Fiber Optic Cable Sensors
© 2013  wenglor sensoric gmbh  |  Impressum  |  Sitemap