Universal Reflex Sensor
UC44PC3S421
- Adaptable for Fiber Optic Cables: Reflex and Through Beam Mode
- Adjustable Detection Range
- Control Panel on the side
The transmitter and the receiver are integrated into a single housing. The sensor evaluates transmitted light reflected back from the object. The output is switched as soon as an object passes the selected range. Bright objects reflect more light than dark objects, and can thus be recognized from greater distances. These sensors are equipped for use with glass fiber optic cable. They can be used with or without glass fiber optic cable.
Optical Data
| Range | 400 mm |
| Switching Hysteresis | < 15 % |
| Light Source | Infrared Light |
| Service Life (T = +25 °C) | 100000 h |
| Max. Ambient Light | 10000 Lux |
| Opening Angle | 12 ° |
Electrical Data
| Supply Voltage | 10...30 V DC |
| Current Consumption (Ub = 24 V) | < 40 mA |
| Switching Frequency | 1 kHz |
| Response Time | 500 µs |
| Temperature Drift | < 10 % |
| Temperature Range | -25...60 °C |
| Switching Output Voltage Drop | < 2,5 V |
| PNP Switching Output/Switching Current | 200 mA |
| Residual Current Switching Output | < 50 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Protection Class | III |
Mechanical Data
| Housing Material | CuZn, nickel-plated |
| Full Encapsulation | yes |
| Degree of Protection | IP54 |
| Connection | M12 × 1; 4-pin |
Output
| PNP NO/NC switchable | yes |
Connection Diagram
Ctrl.Panel
- 01 = Switching Status Indicator
- 02 = Contamination Warning
- 05 = Switching Distance Adjuster
- 08 = NO/NC Switch
Dimensioned Picture
All dimensions in mm (1 mm = 0.03937 Inch)
- 1 = Receiver Diode
- 2 = Transmitter Diode
Wrench Size
Complementary Products
| Glass Fiber Optic Cable |
Data sheet
CAD Data
Connection Technology
Mounting Technology
Fiber Optic Cables