Retro-Reflex Sensor
OLD104C0003
- Smallest Recognizable Part: 0,1 mm
- Special Coated Optic
- Stainless Steel Housing
A reflector must be used in combination with these sensors. They can be installed in all kinds of industrial environments thanks to ample functional reserve. Even reflective objects can be reliably recognized through the use of polarized light.
Optical Data
| Range | 10000 mm |
| Reference Reflector/Reflex Foil | RQ100BA |
| Smallest Recognizable Part | 100 µm |
| Switching Hysteresis | < 15 % |
| Light Source | Laser (red) |
| Wave Length | 655 nm |
| Polarization Filter | yes |
| Service Life (T = +25 °C) | 100000 h |
| Laser Class (EN 60825-1) | 1 |
| Max. Ambient Light | 10000 Lux |
| Opening Angle | 1 ° |
| Beam Divergence | < 15 mrad |
| Light Spot Diameter | see Table 1 |
| Focus Distance | 350 mm |
| Two-Lens Optic | yes |
Electrical Data
| Supply Voltage | 10...30 V DC |
| Current Consumption (Ub = 24 V) | < 30 mA |
| Switching Frequency | 500 Hz |
| Response Time | 1 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -25...60 °C |
| Switching Output Voltage Drop | < 2,5 V |
| PNP Switching Output/Switching Current | 200 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Protection Class | III |
Mechanical Data
| Housing Material | Stainless Steel |
| Coated Optic | yes |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4-pin |
Output
| Contamination Output | yes |
| PNP NO/NC switchable | yes |
Table 1
| Working Distance | 0,2 m | 5 m | 10 m |
| Light Spot Diameter | 2 mm | 42,5 mm | 85 mm |
Connection Diagram
Ctrl.Panel
- 01 = Switching Status Indicator
- 02 = Contamination Warning
- 05 = Switching Distance Adjuster
- 08 = NO/NC Switch
Dimensioned Picture
All dimensions in mm (1 mm = 0.03937 Inch)
- 1 = Receiver Diode
- 2 = Transmitter Diode
Wrench Size
Complementary Products
| Dust extraction tube STAUBTUBUS-01 |
| Reflector, Reflex Foil |
Feasible reflector distance
Reflector type, mounting distance
| RQ100BA | 0,65...10 m | |
| RE18040BA | 0,65...6,5 m | |
| RQ84BA | 0,8...8,5 m | |
| RR84BA | 0,7...9 m | |
| RE9538BA | 0,65...3,3 m | |
| RE6151BM | 0,55...8 m | |
| RR50_A | 0,8...6,5 m | |
| RE6040BA | 0,65...9 m | |
| RE8222BA | 0,75...4,5 m | |
| RR34_M | 0,65...4 m | |
| RE3220BM | 0,65...2,5 m | |
| RE6210BM | 0,65...2,3 m | |
| RR25_M | 0,5...3 m | |
| RR25KP | 0,4...2 m | |
| RR21_M | 0,5...2,3 m | |
| ZRAE02B01 | 0,8...4 m | |
| ZRME01B01 | 0,5...1,5 m | |
| ZRME03B01 | 0,5...3,5 m | |
| ZRMR02K01 | 0,55...1,5 m | |
| ZRMS02_01 | 0,85...2 m | |
| RF505 | 0,7...1,3 m | |
| RF508 | 0,55...1 m | |
| RF258 | 0,55...1,5 m | |
| ZRAF07K01 | 0,7...1,3 m | |
| ZRAF08K01 | 0,7...1,3 m | |
| ZRDF__K01 | 0,6...5 m |
Data sheet
CAD Data
Connection Technology
Mounting Technology
Complementary Products