wenglor sensoric gmbh :: Technical Data

Reflex Sensor with Background Suppression

CP25QXVT80

CMOS line array
Highly accurate switching distance
Minimal switching hysteresis
Switching point independent of material, color and brightness

The sensor uses a high-resolution CMOS line array and DSP technology, virtually eliminating material, color and brightness related switching point differences. Two independent switching outputs are available, at which two switching thresholds and one on or off-delay time (in 10 ms steps) can be configured. Sensor functions can be activated, and scanning results can be acquired via the RS-232 interface.

Optical Data

Range	240 mm
Adjustable Range	40...240 mm
Switching Hysteresis	< 0,5 %
Light Source	Laser (red)
Wave Length	655 nm
Service Life (T = +25 °C)	100000 h
Laser Class (EN 60825-1)	2
Max. Ambient Light	10000 Lux
Light Spot Diameter	see Table 1

Electrical Data

Supply Voltage	10...30 V DC
Current Consumption (Ub = 24 V)	< 50 mA
Switching Frequency	500 Hz
Response Time	< 1 ms
On-/Off-Delay (RS-232)	0...1 s
Temperature Drift	< 15 µm/K
Temperature Range	-25...60 °C
Switching Outputs	2
Switching Output Voltage Drop	< 1,5 V
Switching Output / Switching Current	200 mA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Teach Mode	HT,VT,TP
Baud Rate	38400 Bd
Protection Class	III