Choose a language
wenglor web page
Luminescence Sensor
A1P05QAT80
  • Digital read-out of intensity values via the RS-232 Interface
  • Recognition of luminescenting marks
  • Teach-In, dynamic Teach-In, key potentiometer
The Luminescece Sensor detects with a receiver filter all luminescent markings which emit light within a wavelength range from 420-750 nm. With another receiver filter suppresses especially interfering whiteners.
The sensors have a very small spot, and use a UV LED with a very long service life.
Optical Data
Working Range 30...50 mm
Working Distance 40 mm
Receiving Range 420...750 nm
Switching Hysteresis < 1 %
Light Source UV Light
Wave Length 380 nm
Service Life (T = +25 °C) 100000 h
Risk Group (EN 62471) 2
Max. Ambient Light 10000 Lux
Light Spot Diameter 5 mm
Electrical Data
Supply Voltage 10...30 V DC
Current Consumption (Ub = 24 V) < 50 mA
Switching Frequency 2500 Hz
Response Time 200 µs
On-/Off-Delay 0...100 ms
Temperature Drift < 1 %
Temperature Range -25...60 °C
Switching Outputs 2
Switching Output Voltage Drop 1,5 V
Switching Output / Switching Current 200 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Lockable yes
Teach Mode ZT,DT,TP
Interface RS-232
Baud Rate 38400 Bd
Digital Inputs 2
Protection Class III
Mechanical Data
Adjustment Teach-In
Housing Material Plastic
Degree of Protection IP67
Connection M12 × 1; 8-pin
Output
Configurable as PNP/NPN/Push-Pull yes
NO/NC switchable yes
RS-232 Interface yes
Connection Diagram
Ideal Working Distance
  • a = Working Distance
  • b = Working Range
Ctrl.Panel
  • 01 = Switching Status Indicator
  • 07 = Selector Switch
  • 24 = Plus Button
  • 25 = Minus Button
Dimensioned Picture
All dimensions in mm (1 mm = 0.03937 Inch)
  • 1 = Transmitter Diode
  • 2 = Receiver Diode
Complementary Products
Interface Cable S232W3
Back to: Luminescence Sensors
© 2013  wenglor sensoric gmbh  |  Impressum  |  Sitemap