wenglor sensoric gmbh :: Technical Data

Transit Time Sensor for Measuring Tasks

Y1TA100QXT3

graphical display for easy operation
Switching Output A1 as Analog Output switchable (0...10 V/4...20 mA)
Temperature Drift eliminable
Two mutually independent switching outputs

These sensors have scratch-resistant optics. They use the transit time measurement principle to measure the distance between the sensor and the object. For this reason, the object's color, shape and surface characteristics have practically no influence on measurement results. Even dark objects can be reliably recognized.

Optical Data

Working Range	0,1...10,1 m
Measuring Range	10 m
Resolution	1...12 mm
Linearity	0,2 %
Switching Hysteresis	3...20 mm
Light Source	Laser (red)
Wave Length	660 nm
Service Life (T = +25 °C)	100000 h
Laser Class (EN 60825-1)	2
Beam Divergence	< 2 mrad
Light Spot Diameter	see Table 1

Electrical Data

Supply Voltage	18...30 V DC
Current Consumption (Ub = 24 V)	< 100 mA
Switching Frequency	50 Hz
Measurement Rate	1...100 /s
Response Time	10...200 ms
On-/Off-Delay	0...10000 ms
Temperature Drift (-10 °C < Tu < 50 °C)	< 0,2 mm/K
Temperature Drift (Tu < -10 °C, Tu > 50 °C)	< 0,4 mm/K
Temperature Range	-25...60 °C
Switching Outputs	2
Switching Output Voltage Drop	< 2,5 V
Switching Output / Switching Current	200 mA
Analog Output	0...10 V / 4...20 mA
Short Circuit Protection	yes
Reverse Polarity and Overload Protection	yes
Protection Class	III