wenglor sensoric gmbh :: Technical Data

Reflex Sensor for Measuring Tasks

HT66MGV80

Digital, Analog and Error Output
Go / No-Go testing possible
Infrared Light
Triple Beam Correction Principle

These sensors are equipped with an analog output, as well as a digital output. The upper and lower switching points of the digital output can be adjusted with two potentiometers. The digital output is activated when an object is located within the window defined in this way.

Optical Data

Working Range	350...850 mm
Measuring Distance	600 mm
Measuring Range	500 mm
Resolution	see Table 1
Linearity	1 %
Switching Hysteresis	20 mm
Light Source	Infrared Light
Wave Length	880 nm
Service Life (T = +25 °C)	100000 h
Risk Group (EN 62471)	1
Max. Ambient Light	10000 Lux
Light Spot Diameter	see Table 1

Electrical Data

Supply Voltage	18...30 V DC
Current Consumption (Ub = 24 V)	< 50 mA
Cut-Off Frequency	100 Hz
Response Time	5 ms
Temperature Drift	200 µm/K
Temperature Range	-10...60 °C
Switching Output Voltage Drop	< 2,5 V
PNP Switching Output/Switching Current	200 mA
Error Output Voltage Drop	< 2,5 V
PNP Error Output/Switching Current	200 mA
Analog Output	0...10 V
Output Current Analog Output	500 µA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Overload Protection	yes
Protection Class	III