Controller for Through Beam Sensors
LV250PCT
- AND-OR Logic
- Cascadable
- Master-Slave Operating Mode
- Teach-In, external Teach-In
This light barrier control unit is used in combination with SA250/EA250 light barriers. Interactive influence amongst utilized light barriers is eliminated by the control unit. This sensor series is designed for aggressive industrial environments.
Electrical Data
| Supply Voltage | 18...30 V |
| Current Consumption (Ub = 24 V) | 120 mA |
| Switching Frequency | 250 Hz |
| Response Time | 4 ms |
| On-/Off-Delay | 50 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -25...60 °C |
| Switching Output Voltage Drop | < 2,5 V |
| Switching Output / Switching Current | 200 mA |
| Error Output/Switching Current | 200 mA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Teach Mode | NT,MT |
| cascadable | yes |
| Logic Output | AND / OR |
| External Teach Input | yes |
| Protection Class | III |
Mechanical Data
| Adjustment | Teach-In |
| Housing Material | Plastic |
| Degree of Protection | IP20 |
| DIN-Rail mounting | 35 mm |
Output
| PNP NO/NC switchable | yes |
Ctrl.Panel
- 01 = Switching Status Indicator
- 03 = Error Indicator
- 06 = Teach Button
- 07 = Selector Switch
- 35 = Logic Status Indicator
- 36 = Mode Indicator
Dimensioned Picture
All dimensions in mm (1 mm = 0.03937 Inch)
Complementary Products
| Through Beam Sensor SA250-P24 / EA250-P24 |
Data sheet
CAD Data
Complementary Products