Through Beam Sensor
ZK100VD8
- Miniature Design
- Rugged design with full encapsulation
These through beam sensors are well suited for use in aggressive industrial environments. The sensor can be checked for correct functioning via the test input. Thanks to their large working range, the sensors demonstrate excellent functional reliability in highly contaminated environments.
Optical Data
| Range | 10000 mm |
| Smallest Recognizable Part | > 500 µm |
| Switching Hysteresis | < 15 % |
| Light Source | Laser (red) |
| Service Life (T = +25 °C) | 100000 h |
| Max. Ambient Light | 10000 Lux |
| Opening Angle | 5 ° |
Electrical Data
| Sensor Type | Receiver |
| Supply Voltage | 10...30 V DC |
| Current Consumption (Ub = 24 V) | < 20 mA |
| Switching Frequency | 5 kHz |
| Response Time | 100 µs |
| Temperature Drift | < 10 % |
| Temperature Range | -25...60 °C |
| Switching Output Voltage Drop | < 2,5 V |
| Switching Output / Switching Current | 100 mA |
| Short Circuit and Overload Protection | yes |
| Reverse Polarity Protection | yes |
| Protection Class | III |
Mechanical Data
| Adjustment | Potentiometer |
| Housing Material | Plastic |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M8 × 1; 3-pin |
Output
| PNP NC | yes |
Connection Diagram
Smallest Recognizable Part
Based on the Distance between Emitter and Receiver
- Sr = Switching Distance
- Ø = Diameter, Smallest Recognizable Part
Ctrl.Panel
- 01 = Switching Status Indicator
- 05 = Switching Distance Adjuster
Dimensioned Picture
All dimensions in mm (1 mm = 0.03937 Inch)
- 1 = Receiver Diode
- 2 = Switching Status Indicator
Data sheet
CAD Data
Connection Technology
Mounting Technology
Emitter