Fiber Optic Cable Sensor
ODX402P0099
- Add-on module for ODX402P0088
- Menu-driven settings
- No wiring required thanks to plug connector
- Recognition of Transparent Objects
- Reflex and barrier operation mode are possible
These sensors are connected to the basic module. wenglor fiber optic cables can be adapted to them. The modern OLED display assures easy, menu-driven sensor setup. Signal strengths and the switching threshold can be read from the display as numeric values or as a bar graph. Convenient programming and quick diagnosis is possible via the IO-Link interface.
Optical Data
| Switching Hysteresis | < 15 % |
| Light Source | Red Light |
| Wave Length | 660 nm |
| Service Life (T = +25 °C) | 100000 h |
| Max. Ambient Light | 10000 Lux |
Electrical Data
| Current Consumption (Ub = 24 V) | + 10 mA |
| Response Time | + 70 µs |
| On-/Off-Delay | 0...10000 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -25...60 °C |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Teach Mode | NT,MT,ZT,DT,FT,HT,TP |
| Protection Class | III |
Mechanical Data
| Adjustment | Teach-In |
| Housing Material | Plastic |
| Degree of Protection | IP50 |
| DIN-Rail mounting | 35 mm |
Output
| NO/NC switchable | yes |
Ctrl.Panel
- 60 = Display
Dimensioned Picture
All dimensions in mm (1 mm = 0.03937 Inch)
- 1 = Transmitter Diode
- 2 = Receiver Diode
Complementary Products
| Glass Fiber Optic Cable |
| Plastic Fiber Optic Cable |
Data sheet
CAD Data
Complementary Products