Reflex Sensor for Measuring Tasks
HD09MG-P24
- Analog Output
- Error Message
- Red Light
These sensors are equipped with an analog output and can thus be utilized for measuring tasks. The output signal is practically independent of the object´s color. High resolution and a wide variety of measuring ranges allow for use in innumerable applications.
Optical Data
| Working Range | 35...85 mm |
| Measuring Distance | 60 mm |
| Measuring Range | 50 mm |
| Resolution | 500 µm |
| Linearity | < 2 % |
| Light Source | Red Light |
| Wave Length | 660 nm |
| Service Life (T = +25 °C) | 100000 h |
| Max. Ambient Light | 10000 Lux |
| Light Spot Diameter | 2 mm |
Electrical Data
| Supply Voltage | 18...30 V DC |
| Current Consumption (Ub = 24 V) | < 40 mA |
| Cut-Off Frequency | 100 Hz |
| Response Time | 5 ms |
| Temperature Drift | 35 µm/K |
| Temperature Range | -10...60 °C |
| PNP Error Output/Switching Current | 200 mA |
| Analog Output | 0...10 V |
| Output Current Analog Output | 500 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Protection Class | III |
Mechanical Data
| Housing Material | Stainless Steel |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | Prewired |
| Cable Length | 6,1 m |
Output
| Analog Output | yes |
Connection Diagram
Error of Measurement
Typical characteristic curve based on Kodak white, 90 %
- Sr = Switching Distance
- dSr = Switching Distance Change
 |
black 6 % |
 |
grey 18 % |
Ctrl.Panel
- 12 = Analog Output Indicator
- 79 = Run / Error Indicator
Dimensioned Picture
All dimensions in mm (1 mm = 0.03937 Inch)
- 1 = Receiver Diode
- 2 = Transmitter Diode
Wrench Size
Complementary Products
| Analog Evaluation Unit AW02 |
| Dust extraction tube STAUBTUBUS-01 |
Data sheet
CAD Data
Mounting Technology
Complementary Products