Analog Reflex Sensor
UF55MG3
- Analog Output (0...10 V DC)
- Linear Output Signal Proportional to Distance
- Usable with or without Glass Fiber Optic Cable
This sensor is suitable for applications which require analog measurement of the distance between the sensor and the object. The sensor is capable of direct or scanning mode operation. Bright objects reflect transmitted light better than dark objects. Output voltage is dependent upon the brightness of the object to be measured.
Optical Data
| Working Range | 50...500 mm |
| Measuring Range | 450 mm |
| Resolution | 10 mm |
| Linearity | 5 % |
| Light Source | Infrared Light |
| Wave Length | 880 nm |
| Service Life (T = +25 °C) | 100000 h |
| Max. Ambient Light | 10000 Lux |
| Opening Angle | 12 ° |
Electrical Data
| Supply Voltage | 20...30 V DC |
| Current Consumption (Ub = 24 V) | < 40 mA |
| Switching Frequency | 50 Hz |
| Response Time | 10 ms |
| Temperature Drift | 1 mm/K |
| Temperature Range | -10...60 °C |
| Analog Output | 0...10 V DC |
| Output Resistance Analog Output | 1 kOhm |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Protection Class | III |
Mechanical Data
| Adjustment | Potentiometer |
| Housing Material | CuZn, nickel-plated |
| Full Encapsulation | yes |
| Degree of Protection | IP65 |
| Connection | M12 × 1; 4-pin |
Output
| Analog Output | yes |
Connection Diagram
Ctrl.Panel
- 12 = Analog Output Indicator
- 16 = Working Distance Adjustment
Dimensioned Picture
All dimensions in mm (1 mm = 0.03937 Inch)
Wrench Size
Complementary Products
| Glass Fiber Optic Cable |
Data sheet
CAD Data
Connection Technology
Mounting Technology
Fiber Optic Cables